From your computer or device, open the list of wireless networks and select the SSID shown on the scanner label.Turn on the scanner and wait for the lights to stop flashing.Set the connection mode switch on the side of the scanner to the AP mode position.Make a note of the SSID and password for use later. Turn your scanner over and locate the label on the bottom listing the SSID and password for your scanner.Note: For best results, re-install your scanner software and follow the on-screen instructions to connect to a network. Also make sure you have installed your scanner software as described on your scanner Start Here sheet. You must have a computer with a wireless adapter to set up the connection. You can manually connect the scanner to a Wi-Fi network by entering the network names (SSIDs) and passwords for your wireless network router and your scanner (ES-300W/ES-300WR). How do I manually connect to a Wi-Fi network?
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |